Low Voltage Back
 

 

 

 

 
 
Home  >> Products >> Low Voltage >> Themostat & Heater >> Touch - safe Heater
   
TOUCH - SAFE HEATER
 
  CS 060
50w - 150w
 
Features
 
Low surface temperature
DIN rail mounted
Double insulated (plastic)
Wide ovltage range
Small size
 
Touch-safe heater for the use in endlosures with electrical/electronical components. The design of the heater supports
the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side
surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and
hygrostats can directly be connected to the heater CS 060. This heater is also available in a version with plug-in
thermostat requiring no additional wiring (CSF 060). Both versions are designed for permanent operation.
   
 
  Technical Data
 
Operating voltage:    120-240V AC/DC*(min.110V, max.265V)
     
Heating capacity:   See table
     
Heater element:   PTC resistor-temperature limiting
 
Surface temperature   <80℃(176°F), except upper protective grille
     
Connection   4-pole terminal 2.5mm² torpue 0.8Nm max.
 
Casing:    Plastic according to UL94-V-0. black
 
Mounting:    Clip for 35mm DIN rail,EN 50022
 
  Installation position:    Vertical
   
Operating/storage temperature:    -45 to+70℃(-49 to+158°F)
 
Protection type/Protection class:     IP20/II(double insulated)
 
Approvals:    CE
 
Note:    Other voltages on request
 
*Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
 
 
 
 
 
Art. No. Heating capacity Inrush current max.   Air outlet temperature Dimensions Weight(approx.)
06000.0-00 50W 2.5A  +86℃ ( 186.8° F)  110x60x90mm 0.30kg
06010.0-00 100W 4.5A  +120℃ ( 248°F)  110x60x90mm 0.30kg
06020.0-00 150W 8A  +145℃( 293°F) 150x60x90mm 0.30kg
1) Amdient temperature-see Heating capacity/Ambient temperattre diagram.
2) Measured somm above protective gille.
 

 

 

 

  Back

Copyright ©. Sunfad Electrical Group Co., Ltd. All Rights Reserved